Are There Blind Spots In Asheville North Carolina?
Posted February 22, 2012 2:43 PM
Everyone in Asheville North Carolina has blind spots – and no, I'm not talking about the fact that you really don't sing like Jessica Simpson. I mean the areas of the road that you can't see when you're driving around Asheville.
First let's talk about our own blinds spots, and then we can talk about others...
To begin, we can greatly reduce our blind spots by properly adjusting our mirrors to give the widest coverage possible. Make the adjustments in your car before you start to drive.
First, adjust your rear view mirror to give the best possible view directly to the rear of your car. You don't need it to get a better view of either side of the car, the kids in the back seat or your dazzling smile. The rear view mirror should look to the rear.
Next, lean your head until it almost touches the driver's side window. Adjust your side mirror so that you can just barely see the side of your car.
The Organic Mechanic We're on 568 Haywood Rd in Asheville, North Carolina (28806) Call us to make an appointment at 828-255-2628.
Now, lean your head to the middle of the car and adjust the outside mirror so that you can barely see the right side of the car.
With your mirrors adjusted this way, you'll have maximum coverage. Of course driving is a dynamic process – things change every second. So it's wise to take a quick look to the side when passing to make sure that another vehicle hasn't moved into an area you couldn't see in your mirrors.
Depending on the kind of vehicle you drive (car?), you may still have some blind spots. All vehicles have an area behind them that's blind when backing up. The bigger the vehicle, the bigger the blind spot. A pick up or SUV can hide a small child – an RV, bus or tractor-trailer can hide an entire vehicle. So be careful around our Asheville streets!
As you drive around the Hendersonville area, avoid staying in other diver's blind spots. You can't count on them to be watching their mirrors and looking out for you.
Let's talk about safely sharing the road with heavy trucks and buses. In crashes involving a truck and car, the car causes about 40 percent of the accidents. But 78 percent of the fatalities are with the car. The laws of physics are against the smaller vehicle, so it pays to take extra precautions around trucks and buses.
Heavy vehicles have huge blind spots: to the rear, on both sides and up front. They also can't maneuver like a car. They take twice as long to stop and need twice as much space as you do in your car or other type of car. You need to keep wide margins when driving around one of these big rigs.
Here are some tips for passing a heavy vehicle in the Hendersonville area:
Avoid the blind spots. If you can't see the driver's face in one of his mirrors or in a window, he cannot see you!
Don't follow too close. If you can't see one of the truck's mirrors, you're too close.
Make sure there is plenty of room to pass. Trucks are long and take time to get around. If you're on one of our local Asheville North Carolina two way highways, wait for a passing zone.
Don't linger when passing. Because the blind spots are so big on the sides, you want to get through them quickly. If you can't pass quickly, drop back.
Pass on the left whenever possible. A trucks' blind spot is much larger on the right.
Be attentive and wear your seat belts while driving anywhere around Asheville, even short drives.
Don't be aggressive when driving around trucks. Because of their size, they appear to be going slower than they really are. Cutting it short around a truck could be disastrous.
Use your turn signals when starting to pass. Once you can see the full truck in your rear view mirror, it's safe to signal and move over. Don't cut it short or slow quickly when you pull in front of a truck.
Be careful passing a truck at an intersection. Trucks need to turn wide to maneuver through city streets. Squeezing between a truck and the curb could put your car in the Asheville body shop. Look for the truck's turn signals.
We at The Organic Mechanic want you to watch those blind spots – but feel free to sing in the shower all you want.
Posted in the Automotive News category
Lease verses Buy
Posted February 15, 2012 2:18 PM
Lease? Or buy? It's always a tough question for residents in the Biltmore area. But here are a few ideas that'll make the choice more clear.
Either option gives you a choice of how you might finance your car. If you buy, you'll pay the full cost of the car, with maybe an initial down payment, then monthly payments on the balance that pays down the loan principal, and the finance charge.
If you lease, you're financing the portion of the cost of the car that's used up during the term of the lease. When the lease is up, you return the car to your local Biltmore area dealership. You'll pay some money upfront; fees, security deposit, first month's payment and maybe a capital reduction. The month payments include a depreciation cost and a finance charge.
So how do you decide?
First, how big a down payment can you make? A lease would require a smaller down.
How much monthly payment can you afford? Again, lease payments will be much lower for any given down payment.
A lease needs you to have better credit, so that's a factor.
How long will you keep the car? If you tend to keep your cars around for a while, buying is cheaper. But just two or three years? Then leasing is the way to go.
If your car might suffer a ding or two, like, say a work truck would, then buying's better. The leasing company will want their merchandise back at the lease end in tip top shape, and if repairs are needed, you'll pay.
How many miles do you drive in and around the Biltmore area? Important to consider because leases have a mileage limit, and if you go over, you pay a hefty charge per mile when the lease is up. So high mileage means a buy.
Will the car be used for business? Check with your accountant, but both financing options have different tax benefits, depending on your circumstances.
Over the short term, leasing is much cheaper. Medium term, leasing and buying costs are about the same. Over the long haul, leasing is always costs more.
Leases may sound a bit complicated, and the typical lease decision weighs more on the monthly payment, rather than price. So sometimes leasers may pay on a higher purchase price than a buyer would.
Here is a tip: If a salesman asks if you'll be leasing or buying, say you're not sure yet. Make your best deal, then look at financing options.
Here's another: With a buy or a lease, if you total the car, you'll owe the full amount of the loan, or the balance of the lease payments, and usually, it's less than the car's fair market value – and that's all your insurance company will pay. But ask your agent about gap insurance, which pays the difference between fair market value and what you owe. Big consideration for a lease.
Remember, you have to return your leased vehicle in excellent condition, and may need to do all manufacturer's recommended service and maintenance, or face penalties. So see your local Biltmore service center on a regular basis, get the required work done and save the service records. It's well worth it.
Posted in the Automotive News category
Fuel Saving Tip: Check Engine Light
Posted February 8, 2012 2:26 PM
A question for our Asheville North Carolina motorists: How long have you been enjoying the romantic glow of your check engine light?
Hey, it's not there to create ambiance; it's a warning that something's wrong. When your check engine light comes on get it checked at a capable Asheville North Carolina service station.
Many conditions that cause the check engine light to come on affect fuel economy. Some very dramatically.
Always make sure you tighten your gas cap until it clicks. A loose gas cap can cause a false sensor reading that'll make the check engine light come on.
If your date's eyes are smoldering in the reflected glow of the check engine light, try to think of all the gas money you'll save by getting it fixed. Give us a call when you are ready: 828-255-2628
Located in the Asheville area, we service the following communities: Swannanoa, Black Mountain, Weaverville, Mars Hill, Marshall, Biltmore Forest, Fairview, Bent Creek, Avery Creek, Canton and surrounding areas.